lead joint
英 [liːd dʒɔɪnt]
美 [liːd dʒɔɪnt]
网络 填铅接缝,填铅接合; 浇铅接合; 铅接头; 青铅接口
双语例句
- The general manager shall carry out the various decisions of the board meeting, and organize and lead the daily management work of the joint venture.
总经理执行董事会会议的各项决议，组织领导合营企业的日常经营管理工作。 - RA is a disabling condition, and can lead to long-term joint damage resulting in persistent pain and loss of function in affected areas.
RA是一种无法运动的病理状态，它通过被影响区域的持续性疼痛和功能的丧失最终引发关节的永久破坏。 - As with humans, obesity can lead to diabetes along with heart and joint problems.
一如人类，肥胖症可能导致糖尿病，以及心脏和关节问题。 - The technology reduces contacting resistance of the lead wire joint of the cold-light bulb and prolongs service life the cold-light bulb.
本技术方案降低了冷光源灯泡引线接头的接触电阻，延长了冷光源灯泡的使用寿命。 - According to the different combination mode of joint and rock bridge, there are different cracking and perforation mode of rock bridge which lead to macro joint.
根据节理岩桥的不同组合方式，从而形成岩桥的不同破裂、通方式，进而形成宏观上的节理。 - Resistance strain and temperature hysteresis loops properties of lead free solder joint
无铅焊点的电阻应变温度迟滞回线特性 - During the games, incorrect technical movement and direct body contact can easily lead to ankle joint injury of players.
运动过程中，其错误的技术动作和直接的身体对抗，容易导致运动员踝关节损伤。 - The tutor will take them through likely examination questions. The Singapore Chinese Teachers 'Union can take the lead in the joint efforts.
指导教师会领他们复习考试中可能出现的问题。在这方面，华文教师总会可扮演领导的角色。 - The effects of Al foil morphology, powder on the Al foil surface, thickness of Al2O3 film, lead quality, control of vivet joint on contact resistance were studied by the means of metallographical analysis and comparisons of contact resistances after rivet joint for Al foils.
通过金相分析和铝箔铆接后的接触电阻对比，研究了铝箔的腐蚀形貌、铝箔表面粉状物、氧化膜厚度、引线质量、铆接工序控制等对接触电阻的影响。 - Improving on process of lead lap joint in valve electric actuator
阀门电动装置导线搭接工艺改进 - The SEM analysis shows that there is less impurity and porosity and few oxide on the fracture surface of the CuW/ CrCu arc contact manufactured by vacuum sintering, which may lead to the high joint strength of CuW/ CrCu arc contact.
通过对断口的扫描电镜分析，发现真空烧结的触头材料结合面杂质含量。少、无氧化物、孔隙少，这可能是导致真空烧结CuW/CrCu触头材料盼结合强度高的主要原因。 - Based on the advantage of Shanghai, Tongji University and the College itself, the CAUP has taken the lead in establishing a system of international joint teaching on architectural design in China.
充分利用上海、学校和学院的优势，同济大学建筑与城市规划学院在国内建筑院系中率先建立起国际联合建筑设计教学体系。 - Conclusions: It appears that the most significant effect on contact stress of the radiocarpal joint occurs with a 4mm radial shortening ( RS) or more, and lead to significantly effect on wrist joint.
结论：桡骨远端骨折短缩4mm以上时，接触应力有显著变化，影响腕关节功能。 - The dynamic stress-strain and welding residual stress during welding are the significant factors which lead to welded cracking and debasement of the joint properties.
在焊接过程中产生的动态应力应变及随后形成的残余应力，是导致焊接裂纹和接头性能下降的重要因素。 - Conclusion The delay of diagnosis, insufficiency of period of replacement treatment and the dose of factor concentration lead to high prevalence of joint deformity in childhood patients in China.
结论目前血友病患儿的诊断存在延迟，替代治疗疗程和因子剂量的不足是关节畸形高发生率的原因。 - Conclusion: Gradually induced occlusal disorder can lead to degenerative changes in monkey temporomandibular joint with increased TGF β 1 expression in condylar cartilage. TGF β 1 may participate in cartilage repairing during the procedure.
结论：渐进性咬合紊乱可导致髁突退性形变，髁突软骨中TGFβ1表达明显增强，TGFβ1可能参与了关节软骨的修复活动。 - Using a simple Bayesian approach may lead a complex joint distribution of all parameters, but the hierarchical Bayesian model can avoid this problem.
当使用简单的贝叶斯方法时，有可能会导致所有参数的复杂的联合分布，而分层贝叶斯模型的设定，则能够避免这个问题。 - It has been well established that articular cartilage has a limited capacity for self-repair. Cartilage lesions, whenever resulting from trauma or due to the tumor, often fail to heal spontaneously and may lead to progressive destruction of the joint and the onset of osteoarthritis.
关节软骨的自我修复能力极为有限，由于创伤、肿瘤等原因引起的软骨损伤很难自我修复，如果得不到有效的处理韵话，往往会导致进行性的关节退变和骨关节炎的形成。 - In the case of the same device structure, the stress and strain of lead-free device is bigger than the lead devices '. Big stress and strain can lead to solder joint fracture, crack initiation and growth of chip substrate, eventually leading to device failure.
在器件结构相同的情况下，无铅器件所受应力、应变比有铅器件大，大应力和应变可导致焊点断裂、芯片基板裂纹萌生与生长，最终导致器件失效。 - The decreased collagen I expression at mRNA and protein level in the capsule and ligamentum teres of children with DDH may probably lead to hip joint laxity in DDH. 3.
DDH患儿髋关节囊及圆韧带中Ⅰ型胶原在mRNA及蛋白水平表达较正常同性同龄儿降低，可能是导致DDH患儿髋关节松弛的主要原因。 - The disease is characterized by recurrent synovitis and lead to joint deformity and dysfunction eventually.
该病以反复发作的滑膜炎症为特征，最终导致关节畸形及功能障碍。 - The disease mainly involved peripheral small joints, and may ultimately lead to progressive joint destruction, deformity, or loss of function in late phase of disease.
该病病变主要累及外周小关节，最终可能会导致进行性关节破坏、畸形，甚至功能丧失。 - Although the vertebral fusion can resolve the loss of intervertebral height and the occurrence of instability, but the fusion can lead to lose the movement function of intervertebral joint, and accelerate adjacent segments degeneration.
椎体融合虽然能解决椎间高度丢失和失稳的发生，但融合节段丧失了原有的运动功能，同时加速了相邻节段的退变速度。 - Marginal connection rule implies that connection during the formation of the first mover advantage, take the lead in establishing joint enterprises in the follow-up to establish connection process has the advantage.
边际联接规律暗示了联接形成过程中的先发优势，率先建立联接的企业在后续建立联接的过程中具有优势。 - The pathological characteristic of RA includes synovial hyperplasia and inflammation, pannus formation, in the end bone erosion, cartilage loss and joint destruction. If left untreated, it would lead to joint damage and disability.
主要病理特征是关节滑膜的慢性炎症、增生，形成血管翳，造成关节软骨、骨和关节囊的破坏，如果不及时治疗，最终导致关节畸形和功能丧失。 - As the disease progresses eventually lead to joint deformity and loss of joint function.
该病好发于手、腕、足等小关节，多见于中年女性，反复发作，随着病情的发展最终将导致关节畸形和关节功能的丧失。 - If not controlled in time, it will lead to joint deformity, even worse, cause interstitial nephritis, uric acid kidney stones, leading to kidney damage.
如果不及时控制，会导致关节变形，更有甚者，引起间质性肾炎，尿酸性肾结石，导致肾脏的破坏。 - However, the will lead to joint lower than the column. Consequently, the so called sandwich joints are resulted in.
不过，这将导致节点的混凝土设计强度比上下相邻柱的强度低，形成所谓的夹心节点。 - Many reasons lead to fracture of welded joint, however, the quality of the weld itself is the main reason for fracture.
造成焊缝处断带的原因很多，但是焊缝自身质量是导致断裂的主要原因，所以需要严格控制焊缝质量，保证镀锡工艺的连续性，提高生产效率。 - Interferon for the treatment of MPN non-induced leukemia and bone marrow fibrosis, but its treatment often lead to fever, muscle and joint pain and other adverse reactions, some patients can not tolerate the withdrawal.
干扰素用于治疗MPN无致白血病及骨髓纤维化作用，但其治疗后常会出现发热、肌肉关节痛等不良反应，部分患者不能耐受而停药。